TM 10-3930-675-24-2
CONTROL VALVE SOLENOIDS REPLACEMENT - CONTINUED
0171 00
TYPE A SOLENOID INSTALLATION
NOTE
Perform this procedure for each of 12 solenoids to be installed.
1.
Install new O-ring (5) and original orifice from old solenoid onto solenoid (4).
2.
Install solenoid (4) on control valve (3) with two screws (2).
3.
Connect tophandler wiring harness connector (1) to solenoid (4).
TYPE B SOLENOID REMOVAL
NOTE
Perform this procedure for each of two solenoids to be removed.
1.
Press in on retaining clip (8) on side of connector (7) and disconnect tophandler wiring harness connector from side of
solenoid (10).
2.
Remove nut (9) and slide solenoid (10) out of control valve (11).
8
7
9
10
11
TYPE B SOLENOID INSTALLATION
NOTE
Perform this procedure for each of two solenoids to be installed.
1.
Slide solenoid (10) onto control valve (11) and install nut (9).
2.
Connect tophandler wiring harness connector (7) to side of solenoid (10).
0171 00-3