TM 10-3930-675-24-2
HYDRAULIC SYSTEM OIL FILTERS REPLACEMENT - CONTINUED
0185 00
HYDRAULIC SYSTEM IN-LINE FILTERS AND FILTER HEAD REMOVAL - CONTINUED
16
13
14,15
13
16
12
14,15
17
12
17
18
18
19
HYDRAULIC SYSTEM IN-LINE FILTERS AND FILTER HEAD INSTALLATION
1.
2.
Install filter head (12) on bracket (13) with two washers (15) and screws (14).
3.
Connect fittings and hydraulic hoses to filter head (12).
NOTE
New O-ring comes packed with new filter element.
4.
Lubricate new O-ring (16) with lubricating oil.
5.
Clean filter bowl (18).
6.
Insert new filter element (17) in filter bowl (18).
7.
Place O-ring (16) between filter head (12) and filter bowl (18) and install filter bowl on filter head by rotating bowl
clockwise.
8.
Open any ball valve at hydraulic reservoir that was closed.
9.
10.
Start engine (TM 10-3930-675-10) and check for leaks.
END OF WORK PACKAGE
0185 00-5/(0185 00-6 Blank)