TOPHANDLER REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
DO NOT disconnect tilt cylinder hydraulic hoses when disconnecting tilt cylinders from tophandler.
Disconnect each tilt cylinder from tophandler (4):
Remove bolt and lockwasher. Retain lockwasher.
Install bolt into threaded hole (5) in pin, and screw in to withdraw pin.
After disconnecting tilt cylinders, reinstall pin, bolt, and lockwasher in cylinder end for stowage.
Operate tilt cylinders to fully retract right tilt cylinder (6) and fully extend left tilt cylinder (7) (TM 10-3930-675-10).
Rest right tilt cylinder (6) on tilt cylinder support bolt and secure. Secure left tilt cylinder (7) to boom by wrapping cargo
strap around boom.