ENGINE ASSEMBLY REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Flywheel is secured to transmission damper plates with 12 screws.
With assistance, bar engine in clockwise direction using accessory drive while observing through access hole. Stop rota-
tion when screw is visible through access hole.
Remove screw (41) securing flywheel to damper plate.
Repeat steps 25 and 26 to remove remaining eleven screws (41).
Upon removal of last screw, insert guide stud and secure to damper plate.
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting device. Failure to follow this warning may result in
death or injury to personnel.
Remove torque converter and damper plates from engine.