TM 10-3930-675-24-2
CYLINDER HEAD REPLACEMENT - CONTINUED
0199 00
REMOVAL - CONTINUED
3.
Disconnect six fuel injector connectors (11) from cylinder head wiring harness (8).
4.
Remove screws (9) securing clamps (10) and cylinder head wiring harness (8) in place and remove cylinder head wiring
harness.
9
10
8
11
11
NOTE
Mark position of valve push tubes and injector push rods. Push tubes and rods must be installed in the
same positions during installation.
5.
Loosen rocker lever adjusting screws (12). Remove valve push tubes (14) and injector push rods (13).
13
12
14
0199 00-3