TM 10-3930-675-24-2
CYLINDER HEAD REPLACEMENT - CONTINUED
0199 00
REMOVAL - CONTINUED
12.
Install cylinder head lifting bracket (23) on cylinder head (4) and secure with two rocker lever support mounting screws
and two long rocker housing screws. Tighten screws to 35 lb-ft (47 Nm).
23
4
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting device. Failure to follow this warning may result in
injury to personnel.
CAUTION
Place cylinder head on wooden blocks to prevent damage to combustion face.
0199 00-6