TM 10-3930-675-24-2
CYLINDER HEAD REPLACEMENT - CONTINUED
0199 00
INSTALLATION - CONTINUED
NOTE
Crossheads must be installed in the same position from which they were removed.
15.
Install crossheads (15).
16.
Apply a light coat of clean lubricating oil to ball end of valve push tubes (14) and injector push rods (13).
NOTE
Injector push rods are smaller diameter and longer than valve push tubes. Both push rods and push
tubes must be installed as noted during removal.
17.
Install valve push tubes (14) and injector push rods (13) as noted during removal.
15
14
13
14
18.
19.
20.
21.
22.
23.
24.
Operate engine and check for leaks (TM 10-3930-675-10).
END OF WORK PACKAGE
0199 00-16