TM 10-3930-675-24-2
CYLINDER HEAD REPAIR - CONTINUED
0200 00
DISASSEMBLY
1.
Remove and install cylinder head (2) in holding fixture (1) and position wood blocks to support valves (WP 0199 00).
NOTE
This procedure will remove one valve. Perform steps 2 thru 6 for each valve to be removed.
2.
Install valve spring compressor (3) with adapters to compress valve spring (4).
3
2
1
4
3.
Compress valve spring (4) and remove collets (5). Discard collets.
5
4
0200 00-2