TM 10-3930-675-24-2
ROCKER ARM ASSEMBLY MAINTENANCE - CONTINUED
0206 00
REMOVAL - CONTINUED
2.
Position x 18 in. key stock (4) or similar item on top of rocker lever assembly supports (6 and 7). Secure in place with
four screws (5).
5
4
6
7
3.
Loosen four rocker shaft screws (8). Remove front section of rocker arm assembly.
8
8
FRONT SECTION
REAR SECTION
4.
Repeat steps 1 thru 3 and remove rear section of rocker arm assembly.
DISASSEMBLY
NOTE
Mark or tag each rocker lever, shaft, and support with relative position in rocker assembly.
1.
Remove four rocker shaft screws (8) and retaining clamps (9).
2.
Lift shaft (14) and three rocker levers (10, 11, and 12) out of supports (6, 7, and 13).
0206 00-2