TM 10-3930-675-24-2
ACCESSORY DRIVE ASSEMBLY MAINTENANCE - CONTINUED
0213 00
REMOVAL - CONTINUED
NOTE
Accessory drive pulley is a slip fit pulley and does not require use of a puller for removal. Tapping
with a plastic-faced hammer may be necessary to remove pulley.
d.
Remove water pump pulley retaining screw (2) from water pump pulley (3).
e.
Use mechanical puller to remove water pump pulley (3).
PULLER
434-40095
2.
Remove five screws (7), clamping ring (6), oil seal (5), and gasket (4) from front of gear housing. Discard oil seal and
gasket.
3
4
5
6
2
7
0213 00-3