TM 10-3930-675-24-2
ACCESSORY DRIVE ASSEMBLY MAINTENANCE - CONTINUED
0213 00
ASSEMBLY - CONTINUED
12.
Install two plugs (18) and new O-rings (17) in accessory drive housing.
17
18
17
18
INSTALLATION
CAUTION
Take care when installing accessory drive gasket. A twisted gasket may cause a leak path or block oil
passages, resulting in damage to equipment.
1.
Apply a light amount of gasket forming compound to hold new gasket (8) in place and position gasket on gear housing.
NOTE
Driveshaft dowel pin MUST be at 12 o'clock position when installing accessory drive gear assembly.
2.
Rotate drive shaft by hand to orient position of drive shaft dowel pin. Install accessory drive gear assembly (9).
8
9
10
11
GEAR
HOUSING
10
11
10
0213 00-13