TM 10-3930-675-24-2
ACCESSORY DRIVE ASSEMBLY MAINTENANCE - CONTINUED
0213 00
INSTALLATION - CONTINUED
NOTE
Apply thread sealant to threaded portion of screws only.
3.
Secure accessory drive assembly (9) with six screws (11) and new washers (10). Tighten screws evenly to 35 lb-ft (47
Nm).
8
9
10
11
GEAR
HOUSING
10
11
10
NOTE
Yellow dust lip of oil seal MUST be facing out.
4.
Install new gasket (4) and new oil seal (5).
5.
Apply a coating of sealing compound to five screws (7) and install clamping ring (6) and screws. Tighten screws using a
star pattern in two steps as follows:
a.
Step 1: 60 lb-in. (7 Nm)
b.
Step 2: 175 lb-in. (20 Nm)
4
5
6
7
0213 00-14