TM 10-3930-675-24-2
FUEL PUMP ASSEMBLY REPLACEMENT - CONTINUED
0216 00
REMOVAL
1.
On USMC and RESET vehicles, close ball valve at rear of fuel filter.
BALL VALVE
CLOSED
434-40002
2.
Remove four screws (3), nuts (6), and eight washers (4) securing fuel pump (5) to accessory drive (8).
3.
Remove fuel pump (5), gasket (1), and jaw coupling spider (7) from accessory drive (8). Discard gasket.
2
1
8
7
6
4
5
3
4
INSPECTION
1.
Inspect fuel pump mounting flange for cracks and other damage. If cracks are found, replace fuel pump.
2.
Inspect jaw coupling spider and jaw coupling hub for wear and other damage. If either component is worn or damaged,
replace component.
0216 00-2