TM 10-3930-675-24-2
TURBOCHARGER REPLACEMENT - CONTINUED
0217 00
INSTALLATION - CONTINUED
3.
Install discharge elbow (14), v-band clamp (13), and new O-ring seal (15) on turbocharger (5). Tighten v-band clamp.
13
14
15
5
4.
Install oil drain line (10) and new gasket (11) on turbocharger (5) with two screws (12). Tighten screws to 20 lb-ft (27
Nm).
5.
Pour 2 to 3 oz (50 to 60 cc) of clean engine oil into turbocharger inlet port.
6.
Install fitting (6) and new O-ring seals (7 and 8) on turbocharger inlet port and connect oil supply line (9) to fitting.
5
10
9
6,7,8
11
12
0217 00-6