TM 10-3930-675-24-2
RADIATOR ASSEMBLY REPLACEMENT - CONTINUED
0219 00
INSTALLATION
1.
Install two rubber bushings (11) and radiator bracket (14) on radiator assembly (10) with two washers (13) and screws
(12).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance
during procedure. Ensure that any lifting device used is in good condition and of suitable load
capacity. Keep clear of heavy objects supported only by a lifting device. Failure to follow this
warning may result in injury or death to personnel.
Lifting device must have a capacity of approximately 1,000 lb (454 kg) to lift radiator grille and
radiator. Failure to follow this warning may result in injury or death to personnel.
2.
Attach a suitable lifting device to top of radiator assembly (10) with two bolts.
3.
Install radiator assembly (10) on frame with six rubber bushings, new lockwashers, and screws. Remove two bolts and
lifting device.
4.
Secure radiator bracket (14) to vehicle with two screws (9), washers (8), and new locknuts (7).
5.
Attach lifting device to radiator grille (6).
6.
Install radiator grille (6) on side of vehicle with six washers (5) and screws (4).
7,8,9
10
14
12,13
11
0219 00-4