TM 10-3930-675-24-2
TRANSMISSION CALIBRATION
THIS WORK PACKAGE COVERS
Calibration
INITIAL SETUP
Maintenance Level
References
Direct Support
TM 10-3930-675-10
CALIBRATION
NOTE
Calibration procedures and checks must be performed if any of the following maintenance actions
have occurred:
Transmission ECM replaced or disconnected
Transmission oil replaced
Repairs or adjustment made to transmission
Transmission assembly replaced
Access to Calibration Menus.
1.
a.
Turn master battery switch to ON position.
b.
Turn ignition ON.
c.
Place transmission shift control lever in Neutral (N) position.
d.
Apply parking brake.
e.
Start engine and operate at idle speed.
f.
Wait for transmission oil temperature to reach operating range of 131 to 194F (55 to 90C).
g.
Select KALMAR service menu on driver's Electronic Control System (ECS) display screen and press "Enter".
h.
Enter calibration program access number "13221" and press "Enter".
i.
Press right arrow button to locate "CALIBR GEAR BOX" menu, then press "Enter".