TM 10-3930-675-24-2
TRANSMISSION OIL COOLER REPLACEMENT - CONTINUED
0226 00
REMOVAL - CONTINUED
10.
If damaged, remove three screws (21), washers (22), and bracket (20) from flywheel housing (23).
21,22
23
20
INSTALLATION
1.
If removed, install bracket (20) on flywheel housing (23) with three washers (22) and screws (21).
NOTE
Ensure hydraulic hose mounting flange surfaces on transmission oil cooler units are clean and free of
residue.
2.
With assistance, position transmission oil cooler upper unit (12) on bracket (20) and secure with two hose clamp bands
(19).
3.
With assistance, position transmission oil cooler lower unit (13) on bracket (20) and secure with two hose clamp bands
(18).
0226 00-4