TM 10-3930-675-24-2
PARKING BRAKE CYLINDER MAINTENANCE - CONTINUED
0229 00
PARKING BRAKE CYLINDER ASSEMBLY
1.
Install two new seal rings (22 and 24), new dust seal (25), and new O-ring (21) in housing (16).
2.
Apply a thin coat of grease to inner and outer sealing surfaces of piston (17).
3.
Install magnet (26) and new O-ring (18) on adjusting cylinder (9) and install adjusting cylinder in piston (17).
4.
Install piston (17) with adjusting cylinder (9) in housing (16). Install dust seal (25) in groove of adjusting cylinder.
5.
Install six spring washers (19), pressure ring (4), and lock ring (20).
6.
Install bleeder valve (3) in housing (16).
7.
Install new seal ring (23) and fitting (10) in housing (16).
8.
Loosely install adjusting screw (7) and nut (5) on piston (17).
9.
If removed, install new O-ring (8) on cover (6). Loosely install cover.
0229 00-5