TM 10-3930-675-24-2
PARKING BRAKE CYLINDER MAINTENANCE - CONTINUED
0229 00
PARKING BRAKE BRACKET REMOVAL
Remove parking brake rotor (refer to Parking Brake Rotor Removal).
1.
2.
Remove nut (29) and flange (28) from differential shaft (30).
NOTE
Note position of parking brake bracket on axle for installation.
3.
Remove 12 screws (31) and parking brake bracket (1) from front or rear axle (33).
4.
Remove two O-rings (32) from parking brake bracket (1). Discard O-rings.
28
29
30
33
31
1
32
PARKING BRAKE BRACKET INSTALLATION
1.
Install two new O-rings (32) on parking brake bracket (1).
2.
Install parking brake bracket (1) on front or rear axle (33) with 12 screws (31).
3.
Install flange (28) on differential shaft (30) with nut (29). Tighten nut to 774 to 811 lb-ft (1,050 to 1,100 Nm).
Install parking brake rotor (refer to Parking Brake Rotor Installation).
4.
END OF WORK PACKAGE
0229 00-8