SLEWING MOTOR BRAKE REPLACEMENT - CONTINUED
SLEWING MOTOR BRAKE INSTALLATION - CONTINUED
Apply teflon tape to threads of fittings.
Install fittings, plugs, and sight glasses that were removed.
Perform step 2 of Hydraulic Motor Installation.
PLANETARY ASSEMBLY REMOVAL
Remove hydraulic motor, slewing motor brake, and slewing motor gear from planetary assembly.
PLANETARY ASSEMBLY INSTALLATION
Assemble slewing motor gear, slewing motor brake, and hydraulic motor on new planetary assembly.
SLEWING MOTOR GEAR REMOVAL
A removed capscrew can be installed into center hole of retaining plate to aid in plate removed.
Remove four capscrews (8) and retaining plate (9) securing slewing motor gear (10) to shaft of planetary assembly (7).
Slide gear (10) off splined shaft of planetary assembly (7).
SLEWING MOTOR GEAR INSTALLATION
Align splines of gear (10) to shaft splines of planetary assembly (7) and slide gear into place.
Position retaining plate (9) and secure with four capscrews (8).
END OF WORK PACKAGE
0244 00-3/(0244 00-4 Blank)