TM 10-3930-675-24-2
BOOM LIFT CYLINDER REPLACEMENT - CONTINUED
0252 00
INSTALLATION - CONTINUED
NOTE
Ensure pin is clean and free of burrs.
When installing pin, slot in pin for retaining screw must be aligned with screw hole in mounting
bracket.
5.
Install pin (9).
6.
Install new lockwasher (10) and screw (11).
3
9
8
350-887
11 10
7.
Remove sling and lifting device from cylinder (3).
NOTE
Lubricate new O-rings with lubricating oil.
8.
Install new O-ring (5) and hose (7) on cylinder (3) with flange (4) and four screws (6).
4,5
6
7
3
350-394
0252 00-5