TM 10-3930-675-24-2
AIR CONDITIONER COMPRESSOR REPLACEMENT - CONTINUED
0266 00
REMOVAL - CONTINUED
1.
Disconnect A/C compressor (3) connector (2) from engine wiring harness (1).
2.
Loosen locknuts (4 and 9).
3.
Loosen two jamnuts (5) and rotate support rod (6) to allow slack in two belts (8).
4.
Remove two belts (8) from A/C compressor (3) and pulley (7).
1
9
2
8
3
4
5
7
6
5.
Remove locknut (4) and screw (18) from support rod (6) yoke (17) . Discard locknut.
CAUTION
Water and dirt can damage refrigerant system. Refrigerant lines should be capped after disconnection
6.
Loosen two fitting nuts (13) and disconnect two A/C hoses (14) from A/C compressor (3).
7.
Remove locknut (9), bolt (12), two washers (10), and A/C compressor (3) from bracket (11). Discard locknut.
NOTE
Perform step 8 to remove bracket from engine.
0266 00-2