TM 10-3930-675-24-2
CYLINDER BLOCK REPAIR - CONTINUED
0271 00
ASSEMBLY - CONTINUED
NOTE
Camshaft bushings are installed in the following order: 7, 6, 5, 4, 3, 2, and 1.
Ensure oil hole in bushing is at 3 o'clock position as viewed from front of engine on installation.
6.
Install no. 7 camshaft bushing as follows:
a.
Install guide between no. 6 and no. 5 bores.
b.
Install bushing on driver with oil hole at 3 o'clock position as viewed from front of engine.
c.
Drive bushing in bore.
BUSHING
GUIDE
OIL HOLE
BUSHING
DRIVER
CAUTION
Bushing oil groove must be visible in both cylinder block oil drillings to prevent engine damage. Oil
7.
Visually inspect bushing oil groove alignment to ensure bushing is installed correctly.
OIL DRILLING
CYLINDER BLOCK
BUSHING
OIL GROOVE
OIL DRILLING
0271 00-13