CAM FOLLOWER ASSEMBLY MAINTENANCE - CONTINUED
REMOVAL - CONTINUED
Attach cam follower installation/removal tool as follows:
Slide tool under cam follower assembly (4) and around cam follower studs (5).
If necessary, bump dowel supports to loosen.
Slide tool forward until adjustment screws on top of tool can be finger tightened into socket of injector cam follow-
Cam follower assembly consists of two shaft assemblies with a common center support.
Lift cam follower installation/removal tool and cam follower assembly (4) from cylinder block (1).
Place unit on work surface and remove cam follower installation/removal tool.
Cam follower studs have an internal oil passage and must be removed for cleaning and inspection.
Remove seven cam follower studs (5) from cylinder block (1) as follows:
Install two nuts together on cam follower stud (5).
Turn bottom nut counterclockwise to remove cam follower stud (5).