TM 10-3930-675-24-2
IDLER GEARS AND CAMSHAFT DRIVE GEAR REPLACEMENT - CONTINUED
0276 00
REMOVAL - CONTINUED
3.
Remove hydraulic pump idler gear as follows:
a.
Remove and discard rectangular seal (12).
b.
Remove spacer (13), three screws (11), gear retainer (10), and front thrust bearing (9).
c.
Remove hydraulic pump idler gear (7), idler gear shaft (8), and rear thrust bearing (9).
9
8
9
7
10
11
13
12
4.
Remove water pump idler gear as follows:
a.
Remove three screws (17), cover plate (18), and front thrust bearing (16).
b.
Remove idler gear (14) with idler gear shaft (15) and rear thrust bearing (16).
15
16
14
16
18
17
0276 00-3