HYDRAULIC CYLINDER REPAIR (TOPHANDLER, SIDESHIFT, LEVELING,
LOCKING PIN, AND FORKLIFT KIT) - CONTINUED
DISASSEMBLY - CONTINUED
Slide rod out of housing (1).
Slide gland nut to expose flat ends of rod.
Remove clevis (4) attached to rod end by loosening allen set-screw (3). Unscrew clevis from rod.
Slide gland nut (2) off of rod.
Remove all seals (5) from gland nut and piston (2), and discard.
If any of these parts are pitted, scored, gouged, or rusted, cylinder is beyond field repair and should be
Clean and inspect rod, piston, gland nut, and housing (1) for pitting, scoring, gouges, or signs of rust.