Section I. STEERING CONTROL VALVE ASSEMBLY MAINTENANCE
STEERING CONTROL VALVE INSTALLATION
EQUIPMENT CONDITIONS: Negative battery cable disconnected at shunt. (Refer to TM
Cover at front of cab removed. (Refer to TM 5-3810-306-20.)
Right and left front consoles removed. (Refer to TM 5-3810-
1. TAG AND DISCONNECT HYDRAULIC HOSES.
a. Thoroughly clean steering control valve and
before disconnecting hydraulic hoses from valve
It may be necessary to disconnect
automatic control lever lock out
linkage to access all hydraulic hoses.
b. Tag and disconnect four hydraulic hoses (7)
from steering control valve (1). Cap or plug each
hose. Remove and discard packings (8).
Remove fittings (9) and preformed packings (10)
from ports and retain for installation. Cap or plug
ports. Discard packings (10).