TM 5-3810-306-34
2. REMOVE STEERING CONTROL VALVE (1).
a. Working through front console in cab, remove
securing valve (1) to bracket (5) and steering
column.
b. Remove control valve (1) leaving steering
column (4) in cab.
3. INSPECT ALL PARTS FOR DAMAGE. REPLACE
AS REQUIRED.
INSTALLATION:
1. INSTALL STEERING CONTROL VALVE (1).
a. Position control valve (1) to bracket (5) and
washers (6) and bolts (2).
NOTE
Use new preformed packing when
installing hoses and fittings. Coat
preformed packings with clean
hydraulic oil and threads with Loctite
#545.
2. REMOVE TAGS AND INSTALL HYDRAULIC
HOSES TO STEERING CONTROL VALVE (1).
a. Install fittings in ports.
b. Connect four hydraulic hoses to control valve (1)
as tagged during removal.
NOTE
Connect lock out control linkage if
required.
a. Prior to securing cover to front of crane cab,
start engine and check for proper operation and
3. CONNECT NEGATIVE BATTERY CABLE AT
any leaks.
SHUNT. (REFER to TM 5-3810-306-20.)
4. TEST STEERING CONTROL VALVE FOR PROPER
5. INSTALL CAB FRONT COVER. (REFER to
OPERATION.
TM 5-3810-306-20.)
6. INSTALL RIGHT AND LEFT FRONT
CONSOLES. (REFER TO TM 5-3810-306-20.)
END OF TASK
10-3