AXLE LOCKOUT CYLINDER ASSEMBLY
Shop Equipment Auto-Maintenance and Repair, FM Suppl No. 1
Tool Outfit Hyd System, Test and Repair, 3/4 Ton Trailer Mtd
EQUIPMENT CONDITIONS: Axle lockout cylinder assembly removed.
disassembly of cylinder should
include replacement of all cylinder
1. REMOVE AND DISASSEMBLE PISTON AND ROD
a. Remove setscrew (2) at rod end of cylinder.
Do not use air pressure to remove
cylinder rod assembly. Use only a
source of controlled hydraulic oil
pressure if rod assembly is hard to
Exercise extreme care when handling
or setting down cylinder rod. Do not
damage the chrome surface.
b. Unscrew head (9) and remove cylinder rod
assembly from cylinder barrel (3). Cover barrel
When removing seals and rings,
avoid scratching grooved and gland