TM 5-3810-306-34
NOTE
For ease in removal, it may be
necessary to loosen hydraulic
line from swivel to front steer
relief valve and position out
of way of swivel.
c. Lower swivel down through hole onto suitable
dolly.
d. Remove lifting device and sling from swivel, roll
swivel out from underneath crane.
INSTALLATION:
1. INSTALL SWIVEL (7).
a. Position swivel (7) on dolly, attach an appropriate
sling and roll under crane.
b. Lower suitable lifting device through center hole
in turntable and attach to sling.
c. Slowly raise swivel (7) through hole favoring one
side until mounting channel (11) is past
mounting brackets (12).
d. Continue to raise swivel (7) favoring one side
until other side of mounting plate (11) clears
mounting brackets (12).
e. Lower swivel (7) and mounting channel (11) onto
mounting brackets. Align holes and install four
capscrews (10), washers (9) and nuts (8).
Torque nuts to 250 ft-lbs (333 Nm).
f. Remove sling and lifting device.
15-73