TM 55-8115-202-14
Section XXI. MAINTENANCE OF IDENTIFICATION PLATE
a. Close right door (1) and left door (2) assemblies.
4-74.
General.
The identification plate (Container Data Plate) is located
b. Remove four rivets (3) and identification plate
in the rear of the refrigeration container on the outside of
(4) from right door assembly.
the right door assembly.
4-77.
Installation.
4-75.
Inspection.
Inspect the identification plate for obvious damage and
See Figure 4-19 for installation of the identification plate.
defects.
a. Align holes on the identification plate (4) with
rivets hole on the right door (1).
4-76.
Removal.
See Figure 4-19 for removal, inspection and installation
b.
Secure identification plate (4) onto the right
of the identification plate.
door (1) with four rivets (3).
Change 5