TM 55-8145-201-14
4-17. MANUAL HOLDER REPAIR- cont.
d. Inspection.
(1) Inspect box (7) and cover (3) for cracks.
(2) Inspect latches (6) for cracks or broken springs.
e. Repair. Replace defective components.
f.
Assembly.
(1) Apply adhesive to inside surface of cover (3).
(2) When adhesive becomes tacky, press gasket (4) in place on cover (3).
(3) Using rivet tool, install two latch hooks (2) on cover (3) with four rivets (1).
(4) Using rivet tool, install two latches (6) on box with four rivets (s).
g. Installation.
(1) Position box (7) on container wall (9) and install ten drive rivets (8).
(2) Position cover (3) on box (7) and fasten two latches (6).
4-20