PICK UP LIFT FRAME FROM GROUND - Continued
Position bail bar lock (Figure 32, Item 1) on hook (Figure 32, Item 3) with angled plate (Figure 32, Item 2)
resting on hook thumb (Figure 32, Item 4).
Rotate bail bar lock (Figure 32, Item 1) until locking pin hole (Figure 32, Item 7) clears bottom of hook
(Figure 32, Item 3).
Insert locking pin (Figure 32, Item 6) in locking pin hole (Figure 32, Item 7) and install snap pin (Figure 32,
Item 5) in locking pin.
Figure 32. Install Bail Bar Lock on Hook.
Be aware that the lift frame is unstable when suspended on hook and not stowed.
DO NOT move vehicle.
Do not walk under a suspended load. Be aware of the load's movements and keep
personnel clear of that area as well.
Failure to follow this warning may result in injury or death to personnel and
damage to equipment. Seek medical attention in the event of an injury.
Keeping engine at idling speed, push joystick (Figure 33, Item 2) to LOAD and raise lift frame (Figure 33,
Item 1) approximately 8 in. (20 cm) from ground.