STOW LIFT FRAME - Continued
Pull out lower locking plate (Figure 41, Item 1) from cradle on lift frame (Figure 41, Item 3) and rotate locking
plate to horizontal position.
Align locking plate with securing tube (Figure 41, Item 4) and push locking plate toward lift frame (Figure 41,
Lock anti-loose fastener (Figure 41, Item 2).
Figure 41. Engage Locking Plate.
During these procedures, operator will be required to climb on and around the vehicle. Be
sure to wear suitable footwear, ensure no surfaces are slippery, wear suitable gloves and
hard hat, and maintain three points of contact to the vehicle. Failure to follow this warning
may result in injury or death to personnel. Seek medical attention in the event of an injury.
Remove snap pin (Figure 42, Item 3) from locking pin (Figure 42, Item 4).
Remove locking pin (Figure 42, Item 4) and bail bar lock (Figure 42, Item 1) from hook (Figure 42, Item 2).