During these procedures, personnel are required to work outside the vehicle where there
are several projecting parts, and personnel are required to bend down. Take care when
bending and straightening. A hard hat is required. Failure to follow this warning may result
in injury to personnel. Seek medical attention in the event of an injury.
TWISTLOCK SENSOR HARNESS REMOVAL
Tag wires and connectors upon removal to aid in installation.
Note routing of wires and harnesses to aid in installation.
Perform steps 1 through 3 for both right and left sides.
Disconnect twistlock sensor harness (Figure 1, Item 1) from twistlock sensor (Figure 1, Item 2).
Figure 1. Twistlock Sensor Harness Disconnect.