TM 9-3950-253-13&P
0080
INSTALLATION - Continued
8.
Install reflector (Figure 5, Item 2) and two screws (Figure 5, Item 3) on slider assembly (Figure 5, Item 1).
Figure 5. Reflector Installation.
9.
Feed wiring harness (Figure 6, Item 8) through slider bed (Figure 6, Item 1) and install light (Figure 6,
Item 6), two ground wires (Figure 6, Item 5), and screws (Figure 6, Item 4) on slider bed.
10.
Install light cover (Figure 6, Item 2) and two screws (Figure 6, Item 3) on light (Figure 6, Item 6).
11.
Install new tiedown straps (Figure 6, Item 7) as required.
03/15/2011Rel(1.10)root(maintwp)wpno(M582079)