TM 9-3950-253-13&P
0081
REMOVAL
WARNING
Twistlock assembly will fall when roller pin is removed. Use caution and support
twistlock assembly while removing roller pin.
Twistlock housing will swing when roller pin is removed. Use caution and support
twistlock housing while removing roller pin.
Failure to follow these warnings may result in injury to personnel. Seek medical
attention in the event of an injury.
NOTE
Perform steps 1 through 4 for both right and left sides.
Note location of spacers to aid in installation.
1.
Remove locking pin (Figure 1, Item 6) from rear slider bed (Figure 1, Item 1).
2.
With assistance, support twistlock housing (Figure 1, Item 8) and twistlock assembly (Figure 1, Item 7) and
remove bolt (Figure 1, Item 2), washer (Figure 1, Item 3), roller pin (Figure 1, Item 4), two spacers (Figure 1,
Item 5), and twistlock assembly from rear slider bed (Figure 1, Item 1).
3.
Remove clip (Figure 1, Item 10) from locking pin (Figure 1, Item 9).
4.
While supporting twistlock housing (Figure 1, Item 8), remove locking pin (Figure 1, Item 9) and twistlock
housing from rear slider bed (Figure 1, Item 1).
Figure 1. Twistlock Assembly.
END OF TASK
03/15/2011Rel(1.10)root(maintwp)wpno(M582080)