CONVERT TO STANDARD CONFIGURATION - Continued
Use caution while positioning roller pins. Do not allow fingers to come between roller pins
and stowage guide. Failure to follow this warning may result in injury to personnel. Seek
medical attention in the event of an injury.
Use lifting device to raise lift frame (Figure 12, Item 1) until roller pins (Figure 12, Item 2) align with stowage
guide (Figure 12, Item 3).
Figure 12. Align Roller Pins With Stowage Guide.
Remove clip pin (Figure 13, Item 2) from locking pin (Figure 13, Item 4).
Remove locking pin (Figure 13, Item 4) from stowage roller (Figure 13, Item 1) and rotate stowage roller to
Install stowage roller locking pin (Figure 13, Item 4) in outside position on locking plate (Figure 13, Item 3).
Install clip pin (Figure 13, Item 2) in locking pin (Figure 13, Item 4).