CONVERT TO STANDARD CONFIGURATION - Continued
Start engine (PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P).
At stowage control panel (Figure 16, Item 1), set stowage toggle switch (Figure 16, Item 2) to MAN position.
Press and hold STOW button (Figure 16, Item 3). Release button when stowage guide and lift frame
reaches stowed position.
Set stowage toggle switch (Figure 16, Item 2) to OFF position and turn off engine.
Figure 16. Stowage Control Panel.
Lifting cables, chains, hooks, and slings used for lifting must be in good condition
and of suitable capacity.
Improper use of lifting device and improper attachment of cables may cause injury
to personnel and damage to equipment. Observe all standard rules of safety.
Use extreme caution when handling heavy parts. Provide adequate support and
use assistance during procedure. Ensure any lifting device used is in good
condition and of suitable load capacity. Keep clear of heavy parts supported only
by lifting device. Keep fingers clear of hook arm pivot point.
Failure to follow these warnings may result in injury or death to personnel. Seek
medical attention in the event of an injury.
Hook arm weighs 200 lb (91 kg).