(13) Remove the hook arm extension assembly (8) from the PLS BII storage (refer to
TM 9-2320-364-10). Attach the hook arm extension (8) to PLS lift-hook (9). Check that
hook arm extension is securely attached to the lift-hook.
(14) Connect the hook arm extension to CROP, then lift and push CROP into ISO container
until CROP rear bumpers (10) firmly contact front of ISO container and bracing mecha-
nism cams (11) can be positioned into the shoring slots (12) on both sides of the ISO con-
(15) Disconnect the hook arm extension from the CROP and drive the PLS truck forward so the
ISO container doors can be closed.
(16) Remove hook arm extension assembly (8) from PLS lift-hook (9). Store hook arm exten-
sion in PLS BII Storage (refer to TM 9-2320-364-10).