2-17. LOADING/UNLOADING ISO CONTAINER WITH M3 CROP USING FORKLIFT
Rotate cams (10) in two left and right bracing mechanisms until shoring slots (15) on both
sides of ISO container are engaged.
If a cam (10) will not engage shoring slot (15), insert pin (14) into adjustment collar (12)
and turn, adjusting cam (10) forward or aft until cam (10) will engage shoring slot (15).
Depending upon CROP distance from shoring slots, cams will engage in one of two pos-
itions depicted above as Nominal Position and Minimum Position. If required, use a fork-
lift to position CROP so either the Nominal or Minimum position can be achieved.