M3 CROP DECALS AND INSTRUCTION PLATES.
Stencils. The word "LIFT" is stenciled at six places on CROP, two on each side and two in the
front. The word "CARC" is stenciled on right front of front beam. The words "NO LIFT" are stenciled on the angle
iron brace at the bottom of the end structure assembly.
Identification and Shipping Data Plates. Refer to Figure 2-2 for location and descrip-
tion of plates.
The identification plate weight changes for the M3 CROP (S/N SC09001 and up) are as follows:
TARE WEIGHT = 3,730 LB (1,692 KG)
PAYLOAD WEIGHT = 32,520 LB (14,751 KG)
Figure 2-2. Location and Description
of Decals and Instruction Plates
Forklift fork insertion lift points, side.
Forklift fork insertion lift points, front.
"No Lift" point.