Table 9-1. Unit Maintenance Preventive Maintenance Checks and Services - Continued
Not Fully Mission
Bail bar may have metal slivers or sharp edges. Wear gloves if handling or injury to
personnel could result
Check bail bar (15) for wear. If wear at
Wear found exceeds
lower back side of bar is greater than
1/4 in. (6.35 mm) or greater than 1/8 in.
(3.175 mm) at bottom of bar, notify
Visually inspect all weldments (16) for
Cracks or broken welds
cracks and other damage. Report
are found that will
damage to supervisor.