LUBRICATION ORDER
LO 5-3810-306-12
25 February 1993
*This Lubrication Order shall be used in place of the lubrication instructions contained in the GROVE Manufacturing
Company Commercial Maintenance Manual No. 7-187-000004-2 dated 1 Feb 89 that was originally overpacked with the
crane.
CONTAINER CRANE, ROUGH TERRAIN, WHEEL MOUNTED
HYDRAULIC, DIESEL POWERED, DOD MODEL
REFERENCE: TM 5-3810-306-20
On-condition (OC) intervals for oil changes shall be
lubricating.
determined by the Army Oil Analysis Program (AOAP)
Dotted arrow points indicate lubrication on both sides of
laboratory and shall be applied unless otherwise notified.
the equipment.
In the event that the AOAP can not be performed hard
All oil levels to be checked with the crane parked on a
time intervals shall apply.
level surface in transport position, and while oil is cold,
unless otherwise specified.
Hard time intervals and the related man-hour times are
based on normal operation. The man-hour specified is the
The lowest level of maintenance authorized to lubricate a
time you need to do all the services prescribed for a
point is Organizational Maintenance (0).
particular interval. Change the interval if your lubricants
are contaminated or if you are operating the equipment
Reporting errors and recommending improvements. You
under adverse operating conditions, including longer than
can help improve this manual. If you find any mistakes or
usual operating hours. The interval may be extended
if you know of a way to improve the procedures, please let
during periods of low activity. If extended, adequate
us know.
Mail your letter or DA Form 2028
preservation precautions must be taken.
(Recommended Changes to Publications and Blank
forms) direct to: (U.S.
ARMY TANK-AUTOMOTIVE
Clean fittings before lubricating. Clean parts with dry
COMMAND, Warren, MI, 48397-5000). A reply will be
cleaning solvent (SD), Type II or equivalent. Dry before
furnished to you.
DISTRIBUTION STATEMENT A. Approved for public release, distribution is unlimited.
CARD 1 OF 10