TM 10-3930-641-10
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0012 00
LOCATION
ITEM TO
ITEM
MAN-
CHECK/
NOT FULLY MISSION
NO.
INTERVAL
HOURS
SERVICE
PROCEDURE
CAPABLE IF:
WARNING
Ensure area around machine is clear of personnel or obstructions
before articulating machine. Failure to follow this warning may
cause injury or death to personnel or damage to equipment.
Hitch and steering movement can reduce clearances suddenly
and cause injury. Always stop engine BEFORE working in area
of hitch.
CAUTION
Articulate machine full right or left before lubricating center
drive shaft spline, to prevent damage to seal.
0.1 Hours Center Drive With shipping link in stowed position,
81
Monthly
Shaft Spline start engine and steer machine to full
right or full left. Shut down engine.
Apply GAA grease (Item 6, WP 0016
GAA
422-0011
0012 00-33
