TM 10-3930-641-20
(Sheet 3 of 3)
ENGINE LUBRICATION (CONT)
REMARKS
ACTION
LOCATION/ITEM
a. Using strap wrench, remove two and
5. Oil filters
discard.
b. Clean filter mounting bases. Be sure old
gaskets are completely removed.
c. Apply film of clean engine oil to gaskets
on new filters.
d. Install filters snugly; hand tighten.
NOTE
One person should be in cab, while one person
checks for leaks.
Test by turning POWER switch ON. Indicator
6. LOW ENG OIL indicator on opera-
should come ON.
tor's indicator panel
See LO 10-3930-641-12.
Fill.
7. Engine crankcase
Start and run at low idle.
8. Engine
Check for leaks
9. Oil filter bases
Oil level should be between LOW and FULL marks on
Check oil level.
10. Oil level dipstick
LOW IDLE side of dipstick. If not, add oil.
Should be off.
11. LOW ENG OIL indicator on opera-
tor's indicator panel
Shut down.
12. Engine
End
2-154
