TM 10-3930-641-20
(Sheet 3 of 4)
ETHER STARTING AID REMOVAL/INSTALLATION (CONT)
REMARKS
ACTION
LOCATION/ITEM
REMOVAL
NOTE
Remove parts only as needed for repair or re-
placement.
Remove if installed.
1. Ether canister (18)
Unscrew from intake manifold.
2. Atomizer assembly (1)
Remove by removing mounting hardware
a.
3. Tubes (2), (7), and (8)
and clips.
b. Unscrew or disconnect as required
Disconnect and tag wires.
a.
4. Valve assembly (15)
b. Disconnect tube at connector (10).
Remove capscrews (13) and washers 14).
c.
Remove capscrews (3) and washers (14).
5. Clamp (17)
Can be removed by removing remaining cap-
6. Bracket (16)
screws.
Go on to Sheet 4
2-191