TM 10-3930-641-20
(Sheet 2 of 5)
SERVICE BRAKE SYSTEM BLEEDING (CONT)
REMARKS
ACTION
LOCATION/ITEM
NOTE
Be sure to keep hydraulic tank full throughout
this bleeding procedure. You'll have to check
oil level several times.
See TM 10-3930-641-10.
a. Start
1. Engine
b. Run at low idle until LOW PRESS BRAKE
light goes off.
See TM 10-3930-641-10. See page 1-22, BRAKE
c. Stop.
SYSTEM DESCRIPTION, Step 4.
See SYSTEM DESCRIPTIONS, page 1-22 for location.
Open (turn counterclockwise).
2. Brake control valve plug (1)
Push and hold until oil flowing from plug has
3. Brake pedal
no air (no bubbles).
Close.
4. Brake control valve plug
Release.
5. Brake pedal
1. Plug for removal of air
TA 098732
Go on to Sheet 3
2-372
