TM 10-3930-641-20
(Sheet 8 of 11)
LOWER. DRIVE SHAFT REMOVAL/INSTALLATION (CONT)
LOCATION/ITEM
ACTION
REMARKS
1. Bearing cage and shaft (1)
Support shaft with a floor jack (2).
a.
b. Push shaft partly into main frame.
2. Spider and front shaft yoke (3)
Slide onto splined end of front shaft (4).
a.
b. Aline spider with yoke of front differential.
Install. Torque from 90 to 110 lb. ft. (122 to
3. Four capscrews, nuts, and washers
(5)
149 Nm).
2-387
