TM 10-3930-641-20
(Sheet 2 of 2)
GREASE LINES REMOVAL/INSTALLATION (CONT)
LOCATION/ITEM
ACTION
REMARKS
Disconnect.
1. Fittings (1)
Remove.
2. Capscrew and washer (2)
Remove.
3. Clip (3)
Remove.
4. Line (4)
Remove.
5. Grease fitting (5)
Remove.
6. Connectors (6)
NOTE
If a new line is to be used, attach grease fitting
and fill line with appropriate grease (see LO
10-3930-641-12) BEFORE installation.
INSTALLATION
Install.
1. Connector (6)
Install on connector (6).
2. Line (4) and fitting (1)
Install on line (4).
3. Clip (3) and capscrew and washer
(2)
Install on line with fitting (1).
4. Grease fitting (5)
NOTE
Perform Step 4 if you did not use a new line.
End
2-480
